Copper flexible connection is also called copper sheet flexible connection, copper foil flexible connection, flexible copper laminated foil connector, which can be used for transformer installation, high and low voltage switching cabinet, vacuum apparatus, enclosed bus slot, generator and bus, rectifier equipment, connection between rectifier cabinet and disconnector, and connection between bus. It can improve the conductivity, adjust the installation error of the equipment, and at the same time play the role of (shock absorption) work compensation, facilitate the test and equipment maintenance.
The application of flexible copper laminated foil connection is very common. For many electrical equipment, the application of copper foil method for soft connection can be considered. Pay attention to the status of copper foil soft connection, including the application technology of flexible copper laminated foil connection. It is necessary to understand the conductivity of flexible copper laminated foil connector in detail, and also know what needs to be prepared for winding, and then conduct operation and adjustment. After all products are completed, check whether there is a gap.
The flexible copper laminated foil connection installed by bending must be set with increasing length, so that there will be uniform gap between the copper strips after bending. On the one hand, the skin effect is good, and on the other hand, the heat dissipation is also fast.
If the flexible copper laminated foil connection is subject to frequent vibration, it is recommended to increase the area of the contact surface during manufacturing. The direct method is to increase the thickness of the single copper foil. In this way, the friction caused by bolts can be reduced and the probability of copper foil rupture can be reduced. If there is budget space, the upper and lower parts shall be fixed with copper plates, which will have better effect.
