The specifications of copper braided wire flexible connector can be customized according to customer requirements. When determining the specifications, attention should be paid to the installation environment, and appropriate width and thickness should be selected to avoid installation restrictions.
The copper braided flexible connector wire itself is woven from copper wire, so it is soft and bendable. However, if it is too thick, it will affect its flexibility. If there is no limit on the installation width, make a wide and thin type. Under normal circumstances, customers are required to provide drawings or samples of copper braided flexible connectors when customizing them. If drawings or samples cannot be provided, the following specifications and parameters need to be determined:
1. The basic requirements for the length, end size, aperture size, tin plating, and quantity of products of copper braided wire soft connections.
2. If there is no requirement for the thickness of the end, it is necessary to provide the cross-sectional area and the required current carrying capacity of the equipment.
3. If there is no requirement for width, it is necessary to determine the number of holes on one end and the distance between the holes.
4. Whether the copper braided wire is tinned, whether the braided wire should be single-layer, double-layer, or three-layer, and whether it should be covered with insulating tubes.
